Packaging & Manufacturing Consulting
Efficiency Capability, Productivity

View items per page
Sort by
Item 7302 - Agitator Gearbox
Manufacturer
ProQuip
Model
ZF-20

Gearbox for Agitator, NEW. ProQuip Model ZF-20. This is gearbox only but was designed for top entering agitator on tank 21 ft tall, 10,000 gallon capacity. See drawing link for original installation [shaft, propeller, motor not included]. Gearbox designed for 3 HP, 1800 rpm input, gear ration 20.5.

Place Holder
Item 7616 - Agitator motor/gearbox
Manufacturer
Plenty
Model
3809

Agitator gearbox by Plenty Philadelphia Model 3809 S/N 678061145. Built 1988 Agitator speed 37 RPM. Charlie Walters hydroshock 708988 mixer drive.

Place Holder
Item cp127 - Gear Box + Motor 40HP
Manufacturer
Lightnin
Model
508C40T

Lightnin gear boxes - NEW not used. Model 508C40T, right angle drive These are gearboxes with motor drives (ONLY) for top entering tank agitators. One sn is R0628210602. Input rpm 1765, Ratio 30.65, Output rpm 38, Motor is 40 HP 1765 rpm. CW rotation - originally designed for fermenter tank mixer but not used. There are (2) available, priced separately

Place Holder
Item A-1400 - Gearbox
Manufacturer
United Equipment Technologies
Model
Xcel-22

Gearbox and motor - inline. Was originally used for top entering agitator with 1 set of 4-blades featuring bottom steady bearing. 10 HP United Equipment Technologies Model Xcel-22, S/N C1641-7B. Approx. length 40 feet. Falk right angle gear box. Includes Motor. Shaft diameter 2.5 inches. Came from tank dia 28 ft x 39.3 ft tall. This is gearbox and motor only - used. Idled since 2012.

Place Holder
Item A-1306 - Gearbox + Motor 15HP
Manufacturer
United Equipment Technologies
Model

Right angle gearbox and motor. Falk. Was used on top entering agitator with 3 sets of 4-blades featuring bottom steady bearing with shaft length 40 feet. 15 HP United Equipment Technologies Corp. Includes Falk Right angle gear box. Output 47 rpm. This is gearbox and motor only - used. [Photos of shaft and blades are included for info only to indicate prior service - not available. Shaft diameter : ". Came from 26 ft dia tank x 39.5ft tall ] Idled since 2012.

Place Holder
Item A-1407 - Gearbox + Motor 40HP otor
Manufacturer
UET
Model

Right angle gearbox and motor. Was originally used for top Entering agitator. Manufactured by UET - United Equipment Technologies in 2002. Model XCEL 900. Agitator gearbox is United Equip Technology (Job# 0452-01) with Falk Ram gear drive, 90 degree, 1750 rpm input, ratio 105.9, 16.5 rpm output. Falk model # 900MDXD3AZ, serial 02-031136-01. Driven by a Siemens 40HP motor 460v 3/60 1750 rpm. Weight of gearbox/motor is approx 9300 pounds. This is gearbox and motor only - used. [Photos of shaft and blades are included for info only to indicate prior service - not available. Shaft diameter : 4". Came from 55 ft dia tank x 55 ft tall ] Idled since 2012.

Place Holder
Item 6565 - Gearbox for Agitator
Manufacturer
Lightnin
Model
84-S-25

Lightnin 25 HP top entering agitator. Model 84-S-25. Material: Titanium Pd Gr.7, 190RPM, 9.4:1 reduction ratio. Flange mounted 18" 300# RFF. Designed to be driven by 25 HP 3 phase, 60 Hz, 460V 1750 RPM XP motor (not included). Output shaft 3" OD x approx. 7' long. Impellers: Upper blade set type A200 17.5 in. dia. 4-45deg turbine blades. Lower set 24 in. spaced, type R101 6-flat turbine blades 17.5 in. dia with bottom stabilizer ring 18 in. off bottom. Type C Cartridge Mech Seals [Carbon/Ceramic faces, Teflon & Viton 'O' rings]. Shipping Size: 5' W x 2' H x 12' L - 3,000 lbs. (3) available - priced separately.

Place Holder
Item FP101 - Gearbox for Agitator
Manufacturer
Falk
Model
12UBFQ3A 160A3F

Falk gearbox for agitator. Falk Ultramite model 12UBFQ3A 160A3F, serial # 4763976. Built 2009.

Place Holder
Item 7303 - Gearbox for Agitator
Manufacturer
ProQuip
Model
ZF-20

Gearbox for Agitator, rebuilt. ProQuip Model ZF-20. This is gearbox only but was designed for top entering agitator on tank 21 ft tall, 10,000 gallon capacity. See drawing link for original installation [shaft, propeller, motor not included]. Gearbox designed for 3 HP, 1800 rpm input, gear ration 20.5.

Place Holder
Item 5868 - Mixer
Manufacturer
Nord Drivesystems
Model
6382AFB/VL N250TC

Nord Drivesystems top entering tank agitator. Mixer Type 6382AFB/VL N250TC. Inout 1750 rpm, ratio 30.91, output 56.6 rpm. Shaft 19 ft long. Includes Siemens 10 HP 1750 RPM motor

Place Holder
Item 5869 - Mixer
Manufacturer
Nord Drivesystem
Model
SK6382AFB/VLN250TC

Nord Drivesystem Mixer Type SK6382AFB/VLN250TC. 24 ft long. Industrial Electric motor model WWEM15-18-254TO S/N BE0191110 15 HP

Place Holder
Item 6136 - Ribbon Blender 25 cu ft
Manufacturer
Model
.
Capacity
25

SS Ribbon Blender, 26 x 66 x 30 inch Bowl, 25 cu. Ft., Bottom center unload, 7 ft. Height w/38 inch additional support stands available (the current supports may be unbolted at the bowl and beneath the motor mount for transport), Rotor axle equipped w/ Aaron air glands. 10 H.P., 3 Ph., 230/460. Previously used in Food Grade Kosher supervised plant. Blended spices and sugar sub. Approx shipping dims: roughly 2500 lbs., and we'll put it on a skid that is 38 in. (w) x 96 in. (l) x 42 in. (h).

Place Holder
Item 6134 - Ribbon Blender 5 cu ft
Manufacturer
Day
Model
5 Cu Ft
Capacity
5

Ribbon Blender mfg by The J.H. Day Company, Ribbon Blender, 5 Cu. Ft. w/ O.E.M. tri hinge SS top, Serial No. 83781, 16 x 19 x 37 inches (Ht. currently 41 1/2 inches), 1 1/2 HP U.S. Electric Syncro Gear 3 PH Motor, 220/440 Volt, 5.2/2.6 Amps. Excellent shape

Place Holder
Item 5870 - Scott Mixer
Manufacturer
Scott
Model

Scott Mixers. 3010 SS

Place Holder
Item AT-3201A - Tank Agitator Top Entering
Manufacturer
Lightnin
Model
76C25

Lightnin vertical top entering agitator, Model 76C25, sn R068285101. Right angle gearbox - Ratio 31.6, 37 rpm, clockwise rotation - driven by 25HP motor, 1180 rpm 460/3/60. Like new - idle since 2009. Agitator has 3 sets of tri-blades type A510E with bottom steady bearing. Agitator rpm 37. Shaft size 4 inches, length from gearmotor flange to bottom of steady bearing is 654 inches. (Tank is too big to transport but Agitator for sale). Used as Fermenter Tank 3201 agitator

Place Holder
Item AT-3201B - Tank Agitator Top Entering
Manufacturer
Lightnin
Model
76C25

Lightnin Agitator designed for capacity 178,093 gpm @ 64000 in-lbs size 76 C 25 Driven by 25Hp motor 1180 rpm. Material 304 SS Final speed is 38 rpm Impeller diameter is 115 inches. Agitator has 3 sets of tri-blades type A510E with bottom steady bearing. Agitator rpm 37. Shaft size 4 inches, length from gearmotor flange to bottom of steady bearing is 654 inches. (Tank is too big to transport but Agitator for sale). Used as Fermenter tank 3201 agitator

Place Holder
Item AT-3201C - Tank Agitator Top Entering
Manufacturer
Lightnin
Model
76C25

Lightnin Fermenter Tank Agitator designed for capacity 17,8093 gpm @ 64000 in-lbs size. Model 76 C 25 Driven by 25 HP motor 1180 rpm. Material 304 SS Final speed is 38 rpm Impeller diameter is 115 inches. Agitator has 3 sets of tri-blades type A510E with bottom steady bearing. Agitator rpm 37. Shaft size 4 inches, length from gearmotor flange to bottom of steady bearing is 654 inches. (Tank is too big to transport but Agitator for sale). Used as fermenter tank agitator

Place Holder
Item AT-5301 - Tank Agitator Top Entering
Manufacturer
Lightnin
Model
72C2

Lightnin Agitator. Has tripod steady bearing. Model 72C2. Driven by 2 HP motor 1200 rpm, with right angle gear unit final rpm is 36 rpm. Material 304 SS, 12" mounting flange. Has one set of 3-blades type A510E Impeller diameter is 67 inches. Shaft is 2" dia x Overall length of shaft is 348 inches. See links for drawing. Used for Syrup Tank agitator tank size 20' dia x 25' tall.

Place Holder