Packaging & Manufacturing Consulting
Efficiency Capability, Productivity

Categories

Locations

View items per page
Sort by
Item EP-2901 - Condenser
Manufacturer
Jogler, LLC
Model
.

Used as Process Building Vent Condenser. Jogler, LLC. SN 1802268-01. MAWP 50 psi at 150F. MDMT -20F at 50 psi. Part of FluidQuip SGT system (See asset FQ-SGT). Not sold separately at this time.

Place Holder
Item 8069 - Condenser 1950sf
Manufacturer
Crown Iron Works
Model
.
Capacity
1950

Unused Crown Iron Works stripper condenser 1950 sqft (181 sqmt) has (414) 3/4 inch (19.05 mm) diameter x 24 feet (7315 mm) long t304 stainless steel tubes rated 45 psi (3.1 bar). Has 24 inch (610 mm) diameter x 24 ft (7315 mm) long carbon steel shell rated 15 psi (1.03 bar). Was used as stripper condenser

Place Holder
Item 8071 - Condenser 374sf
Manufacturer
Crown Iron Works
Model
.
Capacity
374

Unused Crown Iron Works 374 sq ft (35 sq mt) horizontal condenser. Has (119) 3/4 inch (19.05 mm) diameter x 16 feet (4877 mm) long 304l stainless steel tubes rated -15/75 psi (-1.03/5.17 bar) design pressure at 250 deg F (121 deg C). Has 14 inch (356 mm) diameter x 16 ft (4877 mm) long carbon steel shell rated -15/165 psi (-1.03/11.37 bar) design pressure at 300 deg F (149 deg C). New 2004.

Place Holder
Item 8067 - Condenser 5088sf
Manufacturer
Crown Iron Works
Model
.
Capacity
5088

Unused Crown Iron Works desolvent toaster condenser. 5088 sqft (473 sqmt), has (1080) 3/4 inch (19.05 mm) diameter x 24 ft (7315 mm) long t304 stainless steel tubes rated 45 psi (3.1 bar) design pressure. Carbon steel shell 40 inch (1016 mm) diameter x 24 ft (7315 mm) long rated +/-1 psi (-0.06/0.06 bar) design pressure. New 2004. Was used fior Desolvent Toaster condenser

Place Holder
Item E-4101 - Condenser Reboiler 11,050 sf
Manufacturer
DCR Construction
Model
NEM
Capacity
11050

Reboiler, condensing heat exchanger horizontal shell & tube on saddles, mfg by DCR. Size approx 60" dia x 425" long. Has 1141 ss304 tubes 1.25" OD for surface area 11,050 sq ft. ASME NB# 233, MAWP shell 150 psig/FV at 400F & tubes 150 psig/FV at 300F. TEMA design NEM CLASS C. Material CS Shell/SS304 Tubes. Shell side saturated steam/tube side beer. Inspected, Reconditioned and repaired in 2015 - ran for only 3 more years. Used as Beer Column Reboiler sn 4101-7793

Place Holder
Item 21-E-184 - Condenser, LP Flash Gas
Manufacturer
Mueller
Model
Type NEN
Capacity
126

Shell and tube heat exchanger size 14" OD x 300" long with expansion joint. Type NEN, Class B. 3.47 MMBTU/hr; ASME MAWP Shell Side 150 psig @250 deg F, Carbon Steel; Tube side: 150 psig & FV @ 350 deg F; 304 SS. Ser# 403354-1. (144) tubes 0.75" OD ss304L. Approx 126 sf surface area Shell nozzles 6" in/out. Tube nozzles 2" inlet/6" outlet. Physical weight empty 2,620 pounds.

Place Holder
Item E-4201 - Condenser, Reflux 3187 sf
Manufacturer
DCR Construction
Model
BEM
Capacity
3187

Condenser. Heat exchanger vertical shell & tube design with skirt. 1 pass. Size 32" OD x 72" OD x 568" OAH (47.3 ft). Skirt height 165". Has 821 tubes ss304 at 0.75" for surface area 3,187 sq ft. sn 4201-7793 ASME NB# 230 MAWP 150 shell/ 75 tube psig at -20/300F. TEMA Design BEM CLASS: C. Material CS Shell/SS304 Tubes. Shell side cooling water, tube side reflux. 47 MMBTU. Used as Reflux Condenser

Place Holder
Item E-4504 - Condenser, shell & tube 12,595 sf
Manufacturer
DCR Construction
Model
NEM
Capacity
12863

Evaporative Condenser, mfg by DCR Construction. Insulated Horizontal shell & tube heat exchanger, 1 pass. Vapor inlet 54" and 4"/outlet 6" to evap vacuum eductor VE-4505. Cooling water inlet/outlet 30"/30". TEMA style NEM. ASME Nat'l Bd# 238, MAWP shell 150 psi/FV at 200F, tubes 50 psi/FV at 300F. Sn 4504-7793. Size 72" OD x 264 inch long tube area and 447.8" OAL Has 1785 tubes at 1.25" OD for 12,863 sf area. Sized for condensing air & water vapor at60.6 scfm at 105F.outlet to vacuum eductor. Horizontal, on saddles. Built 2008. Mat'l shell cs, tubes ss304. Weight 54108

Place Holder
Item E-2101 - Condenser, shell & tube 408 sf
Manufacturer
DCR Construction
Model
BEM
Capacity
408

Condenser. Heat exchanger Shell & Tube. Vertical. Size approx 16" O.D. dia x 136.6 " long. Heat transfer area 408 sq ft - Has (212) tubes at 0.75" OD x 120" long. ASME MAWP 150 shell / 75 tube psig at -20/300F. Design Class BEM CLASS: C, 1-pass heat exchanger. Material carbon steel shell/SS 304 Tubes. Sn 2101-7793. Cooling water on shell side and ethanol/air/water on tube side. This is a tank vent condenser (used for slurry mix tank TK-2101). Flat bottom sits on tank top, vent inlet bottom 16" inlet/outlet vent top 4". Cold Water supply/return 4"/4". Vent opening in bottom. See condenser drawing in Link on web page.

Place Holder
Item E-4102 - Condenser, shell & tube 1035 sf
Manufacturer
DCR Construction
Model
BEM
Capacity
1035

Vapor Condenser. Heat exchanger shell & tube mfg by DCR. 1 pass. Size 32" OD x 89.5" long. Vertical with dome top/flat bottom (inlet) with flange. Has lifting lugs. Has 914 tubes ss304 at 3/4" for surface area of 1035.7 sq ft. Sn 4102-7793, ASME NB# 213 - MAWP shell 150 psig/FV at 300F/tubes 75 psig/FV at 300F. TEMA design BEM CLASS C. Material Shell carbon steel SA-516, tubes ss304. Shell cooling water, tubes CO2/ethanol. Vapor inlet/outlet 32"/2". Cooling water inlet/outlet 8"/8". Used as Beer Column Vent Condenser

Place Holder
Item E4504 - Evaporative Condenser 10,514sf
Manufacturer
Paul Mueller
Model
Capacity
10514

Shell & tube heat exchanger designed for use as Evaporator Condenser. Built in 2007 by Paul Mueller Company. Size 72" OD x 391" (32.6 ft) OAL. TEMA type NEM. Has 1,785 ss 304L tubes 1.25" OD. MAWP Shell side: 150 psi @ 200 degrees F. Tube side: 50 psi @ 300 degrees F. Has 1,785 tubes at 1.25" OD x 216" long for approx 10,514 sf surface area. Material: shell cs SA-516 Gr 70, tubes ss304L. S/N 366273-13. Empty weight: 50,332 pounds. Built 2007 - never used. Nozzles: See Drawing link. 18 inch cooling water in/out. Tubeside non-condensables 4" inlet, 6" outlet. Tubeside condensables 3" inlet, 6 inch outlet. Also 54" tubeside inlet with 304ss cladding. This is new, never used in original packing crates.

Place Holder
Item 8066 - Evaporative Condenser 5013sf
Manufacturer
Crown Iron Works
Model
.
Capacity
5013

Unused Crown Iron Works approximately 5013 sqft (466 sqmt) 1st stage evaporator. T304 stainless steel tubes has (1064) 3/4 inch (19.05 mm) diameter x 24 feet (7315 mm) long 304 stainless steel tubes rated 15 psi/full vac (1.03 bar/full vac) design pressure. Has 58 inch (1473 mm) diameter x 24 feet (7315 mm) long shell rated +/-1 psi (-0.06/0.06 bar) design pressure. New 2004.

Place Holder
Item ET-4202 - Evaporative Condenser ss
Manufacturer
Thermal Kinetics
Model
.
Capacity
45

Evaporative condenser: Evaporator by Thermal Kinetics. Size 4.5' dia x 50' s/s on 8' cs skirt. OAH approx 60'. Capacity 45.1 MMBTUH, Material ss304L. Design: Tubes FV/25psig, 150F; Shell: FV/75psig, 200F. Used as Thermal Kinetics 3rd and 4th Stage/Second Effect Evaporator

Place Holder
Item 8068 - Evaporator Condenser 9498sf
Manufacturer
Crown Iron Works
Model
.
Capacity
9498

Unused Crown Iron Works 9498 sqft (882 sqmt) 304 ss horizontal evaporator condenser. Has (2016) 3/4 inch (19.05 mm) diameter x 24 ft (7315 mm) long 304 stainless steel tubes rated 55 psi (3.70 bar) design pressure at 100 deg.f (38 deg.c). Has 56 inch (1422 mm) diameter x 24 ft (7315 mm) long shell rated +/-15 psi (-1.03/1.03 bar) design pressure at 212 deg.f (100 deg.c). 4 pass tube side, 2 pass shell side. New 2004. Vapor inlet 36:. Shell 56" OD x 24 ft.Overall size 6 ft top to bottom x 27ft-2" long, empty weight approx 32,970 pounds

Place Holder
Item 31-V-164 - Flash Drum, High Pressure
Manufacturer
PPV Precision Pipe & vessel
Model
Capacity
3075

High Pressure Flash Drum. Manufactured by Precision Pipe & Vessel in 2009 - ran 42 days only - like new. Physical size 72"dia x 11'-6" for 3750 gallon capacity. ASME rated MAWP 200/FV at 250F. Nat'l Bd# 679, s/n CV-0884. Material: tubes 304SS - shell carbon steel. Part of module fp311

Place Holder
Item X-400P - Heat Exchanger Plates
Manufacturer
Alfa Laval
Model

Approx 49 plates for Alfa Laval plate heat exchanger X-400 - priced for the lot

Place Holder
Item E-7707 - Heat Exchanger shell & tube
Manufacturer
Thermal Transfer Products
Model
SSC-1260-6-6-F
Capacity
110

Shell & tube heat exchanger by Thermal Transfer Products. MAWP shell 300 psig at 300F/tubes 150 psig at 300F. Sn 788112. Size 6.25" OD x 66" long. Tube side connections 3" screwed / shell side connections 2.5" NPT. Can handle flows from 20 gpm to 110 gpm. Used as Gluco system Heat Exchanger,

Place Holder
Item 31-E-228 - Heat Exchanger, Fin Tube 162 sf
Manufacturer
Koch
Model
HEx 1 MMBTU
Capacity
162

Fin tube heat exchanger Koch Heat Exchanger - hairpin design, 1 turn u-tube 162 sq ft surface area. Designed for 1.04 MMBTU/hr, Syn Gas 300/110F, Water 90/110F. 0.75/0.083, 2790 #. ASME MAWP shell 800 psig/FV at 350F, tubes 615 psig at 250F, Nat'l Bd# 19197, s/n 12110-09-4-01. Material 8 inch carbon steel. Built by Koch Heat Transfer Company in 2009 - used only 42 days - like new. Used as 4th Stage Booster Spillback Cooler.

Place Holder
Item 31-E-104 - Heat Exchanger, Fin Tube 223 sf
Manufacturer
Koch Heat Transfer Co.
Model
1.8 MMBTU
Capacity
223

Fin tube heat exchanger, hairpin design, 1 turn u-tube mfg by Koch Heat Transfer Company. Has 223 sq ft heat exchange area. Rated at 1.81 MMBTU/hr, Syn Gas 300/110, Water 90/110F. 0.75/0.065, 2700 #. ASME rated at 215/FV at 350F. Stainless steel 304. Physical size 8" dia sch40. Built in 2009 - ran only 42 days - like new. Used as 1st Stage Booster Intercooler.

Place Holder
Item 31-E-208 - Heat Exchanger, Fin Tube 298 sf
Manufacturer
Koch
Model
1.8 MMBTU
Capacity
298

Fin tube heat exchanger, hairpin design, 1 turn u-tube built by Koch Heat Transfer Company in 2009 - 298 sq ft heat exchange area. Rated at 1.811.69 MMBTU/hr, ASME MAWP tubes 400 psig/FV at 350F and shell 305 psig at 250F, Nat'l Bd# 19195, s/n 12110-09-2-01. Water 90/110F, Syn Gas 300/110F. 0.75/0.065, 2950 #. Tubes 304SS, shell cs, size 8 in dia, schedule 40. Used as 2nd Stage Booster Intercooler

Place Holder
Item ET-4113A - Heat Exchanger, frame only
Manufacturer
Tranter
Model
GFP-167-M-8-HP-55

Tranter Superchanger plate heat exchanger - FRAME ONLY - plate pack gone. Original design: Model GFP-167-M-8-HP-55, capacity 4.47 MMBTUH Material 304 SS Design 50 psig / 220 deg F. 857 sf See link for drawing and U-1. Last used as Beer Preheater No. 1

Place Holder
Item ET-4113B - Heat Exchanger, frame only
Manufacturer
Tranter
Model
GFP-167-M-8-HP-55

Tranter Superchanger plate heat exchanger - FRAME ONLY - Plate pack missing. (original design was capacity 4.47 MMBTUH Material 304 SS Design 50 psig / 220 ?F. See link for drawing and U-1. 857 sf Last used as Beer Preheater No. 2 )

Place Holder
Item 31-E-220 - Heat Exchanger, Hairpin 228 sf
Manufacturer
Koch
Model
1.46 MMBTU HEx
Capacity
228

Koch Heat exchanger, hairpin design 228 sq ft heat exchange area. Rated at 1.46 MMBTU/hr. Water 90/110F, Syn Gas 300/110F. 0.75/0.065, 3170 #. ASME MAWP 800/FV at 350F. Physical size 8 in dia sch 40, tubes 304SS/shell cs. Built by Koch Heat Transfer Company in 2009 - like new. Used as 3rd stage booster intercooler.

Place Holder
Item 2415 - Heat Exchanger, Plate
Manufacturer
Paul Mueller Company
Model
AT40

Paul Mueller Company Accu-Therm Plate Heat Exchanger, Model AT40 B-20. ASME Maximum W. P. 100 psi @ 150F. Previously used with water cooled air compressors. Stored in climate controlled building before and after removal. Approx size 70 1/4" H, 27 " W. Typical max flow GPM H20: 1150. Two available, priced separately. One National Board # 14553, S/N W-30026-2, 1988. Second one National Board # 38064, S/N 321530, 2004.

Place Holder
Item 7630 - Heat Exchanger, Plate
Manufacturer
Sondex, Inc
Model
S201S38

Plate Heat Exchanger. Sondex, Inc. S/N 9107. Model # S201S38. ASME Nat'l Bd# 541, MAWP 150 psi at 200F, Design pressure 150 psi. Corrugated herringbone pattern plates - designed for one pass solutions. Built 2007 - removed and ready to load

Place Holder