Packaging & Manufacturing Consulting
Efficiency Capability, Productivity

Categories

Locations

View items per page
Sort by
Item 8097 - Biodiesel Plant
Manufacturer
Model
Capacity
5

4.9 MGY biodiesel plant. This plant uses an enzymatic process to convert high FFA feedstocks into biodiesel. Includes complete PLC controls, 7 acres, and 45,000 sq. ft. building. This plant has been tested and proved out but never entered full production. It still has all permits current and is ready to start up immediately.

Place Holder
Item 8053 - Biodiesel Plant 1 MGY
Manufacturer
Model
Capacity
1

Biodiesel Plant - entirely moveable, in containers: Complete 1 MGY (million gallons per year) biodiesel plant built in 2008 by Progressive Recovery, Inc. Designed to produce biodiesel with lower cost and higher ffa used cooking oil (UCO). Idled in 2011. This plant did produce and sell biodiesel to spec. This plant is self-contained within two 40-foot shipping containers. One container is used to filter the incoming oil and the other is used for the biodiesel production. Includes the trailers under the containers. Must be relocated.

Place Holder
Item 7410 - Biodiesel Plant 15 MGY
Manufacturer
Greenline
Model
Capacity
15

Biodiesel plant rated for 15 MGY (million gallons per year). Complete plant including land, rail siding, rail & truck loading, 13 tanks. Two separate complete biodiesel trains capable of operating independently on different feedstocks - a 5 MGY system and a 10MGY system. All electrical, lab, utilities, and auxiliaries. Plant is a Greenline design capable of running multi feedstocks. It ran animal fat during its production. The 10MGY train was added new in 2008 - plant has been Idle since 2010. All automatic - Allen Bradley plc control. Can be run in place. If moved, removal is extra. Land size is approx. 240 ft x 650 ft for 3.5 acres. Much more information available in our Virtual Data Room (VDR). Please ask for an invitation. This plant can be used as a terminal - has 12 rail spots, 2 truck spots, and 1.4 million gallons of storage.

Place Holder
Item 5766 - Bleach System 150 MTPD
Manufacturer
DeSmet
Model
Bleaching
Capacity
150

Stainless steel continuous bleaching system, capacity up to 150 MTPD. Includes DeSmet stainless steel 2,000 gallon bleacher with demister pads, (2) LFC Lochem vertical filters with 38 sq m surface area each, 1 pumps. Built in 1985. See the schematic and flyer for more details. Bleacher Size 5 ft diameter with 3.5" insulation, 14 ft tall. Does not include the vacuum system but we can provide a new update vacuum system, and also an updated earth handling system. Approximate area needed: 15 ft x 20 ft for bleaching system & filters plus 10 ft x 10 ft for earth handling. Idled 2014. Two floors. Price includes removal and loading on your trucks or containers.

Place Holder
Item 151022 - Corn Syrup Idle Assets
Manufacturer
Model

Complete systems and idle assets from a corn syrup plant and pellet feed fertilizer mill. Most equipment bought new in 2006, then idled in 2012. 7 silos, Alfa Laval plate heat exchangers, 800HP Fan Blowers, bucket elevators and conveyors, hammermills, heat recovery steam generator (HRSG) boiler and economizer, stainless steel boiler stack with gas emissions monitor station. Sold as total systems or as separate pieces - available now. See Flyer and Equipment List in LINKS.

Place Holder
Item 7421 - Crush Extraction Plant 240 TPD
Manufacturer
Bionerg - Argentina
Model
Capacity
240

Mechanical extraction plant built to crush soybean. The crush plant was finished in 2008, ran 1,000,000 bushels of soybean in 2009 and was then idled in 2012. It is designed by Bionerg to run 9,000 kg/hr (~240 tons per day) soybeans with 2% impurities maximum. The designed output is 14% degummed oil and 82% high fat soybean meal. Includes a degumming system which produces the oil suitable for biodiesel production. The meal has residual fat of 6-8% which makes it ideal to sell to nearby chicken farms as feed. There is no issue getting beans to run in the plant and the owner states they could easily sell all the meal they made. There are three 125,000 bushel grain bins and one meal bin for storage. The plant also includes a very nice office building, truck scale, meal loadout, GSI vertical grain dryer, oil tank farm (with six 25,000 gallon tanks), oil loadout, all electrical & controls, air compressor, and boiler. There are 3 production lines, each with 2 IMDB EX 1605 extruders and 1 MACOEX PTE 30 press. The programming and the plant are still supported. Ideal to purchase with land to run in place.

Place Holder
Item 6529 - Hydrogen Gas Plant 55,000 scfh
Manufacturer
Glitsch Technologies
Model
1.3 MM scfd

Hydrogen generating plant engineered by Glitsch Technologies and installed by McAbee Construction in 1995. Design capacity is 1.3 MM scfd (55,000 scfh). Includes waste heat boiler for steam export. Plant is now shut down, and proper shutdown procedures were followed. Built to US standards and measurements. Purity to 99.99% H2. Mothballed in 2006, boiler dry packed and plant under nitrogen. Reformer holds 10 tubes - currently has 8 installed. Voltage 575V 60 Hz. Complete plant intact except for one psa vessel repurposed.

Place Holder
Item 6530 - Hydrogen Gas Plant 90,000 scfh (Partial)
Manufacturer
Hydro-Chem
Model
90,000 scfh (tuned/running at 45,000 scfh)

Partial Hydrogen generating plant engineered by Hydro-Chem built in 1980. Design capacity is 90,000 scfh at 200 psig with a purity of 99.99% pure hydrogen - was running on 10 of its 20 tubes for 45,000 scfh capacity. Reformer can be fired on natural gas or propane - same burner. Waste heat boiler generating 3,000 to 5,000 #/hr export steam at 250 psig. PSA plant (4 psa vessels replaced in 1998) with Jamesbury valves kept up to date, Quench pot design. Plant is missing small natural gas compressor, heat exchangers, and pumps. Has new tubes, new reformer and shift converter catalyst. Five (5) spare tubes available. Plant has just recently shut down in mid 2012, and proper shutdown procedures were followed - still under nitrogen blanket. Reformer tubes are 6.625" OD, 5.25" ID, 30.825" long and made of alloy HP50 (also known as 25/35).

Place Holder
Item 5350 - Hydrogen Generating Plant
Manufacturer
Hydro Chem
Model

Hydro Chem hydrogen generating plant, pressure swing adsorption type. Capacity is 30,000 SCFH. Reformer designed with 8 tubes (6 installed) and a ground mounted waste heat boiler. There are 4 psa columns. The waste heat boiler provides approximately 2 tons/hr of steam export at 290 psig. The high pressure gas compressor is a 60HP Gardner Denver. System is still installed but will have to be reconditioned. System includes all controls, valves pipes. Plant idled in 2015.

Place Holder
Item fp100 - Methanol Mixed Alcohols System
Manufacturer
Model
Capacity
5

Mixed Alcohols and/or Crude Methanol Production - NOW SELLING individual modules and pieces of equipment. Click the links for listing of all equipment. Partial Plant & System: Fischer-Tropsch process. LIKE NEW - only ran 42 partial days. Surplus to the ongoing operation. Produced Mixed Alcohols. Catalytic Conversion of Organic Alcohols. Designed for 125 TPD woody biomass input, for 5 MGY (million gallons per year) methanol output. Plant was designed to convert biomass gas into organic alcohols using the Fischer-Tropsch Process. It is a pentane based batch azeotrope separation system. The wood yard & gasifier system are not part of this sale. However, most Fischer-Tropsch process equipment and systems downstream are included: Metso feeder system, Quench, Gas Cleanup, Compression (2 sets), Catalytic Converter, Alcohol cooling/compression. Equipment was purchased in 2009 and installed in 2009/2010. Manuals, drawings available. Price includes all structure and instruments, but does not include removal. We can remove and load for you if desired. See flyer for complete arrangement and details.

Place Holder
Item 7018 - Refinery-Bleach-Deodorizer 20MTPD
Manufacturer
DeSmet Rosedowns
Model
20 MTPD

Complete Refinery - NEW. Capacity 20-40 MTPD (Can be modified to get 40-80 MTPD). This plant was installed in 2002-2003 but was never started up. Manufactured by DeSmet Rosedowns. Includes neutralizing, bleaching, deodorizing plus steam boiler 300HP. This is a batch type system. Includes the following: 1. Batch Bleacher / Neutralizer Vessel, 2. Batch Deodorizing Unit , 3. Steam Generator 300HP Reconditioned Donlee Firetube Boiler (natural gas for US firing), 4. Crude Oil Heel Tank, 5. Bleaching Earth Hopper, 6. Vacuum Tank DeSmet 841-A, 7. Soap stock storage tank, 8. Pressure leaf filter, 9. Lot of structures, platforms and supports included, 10. All drawings, manuals and related information included, 11. The PFD drawing shows in red the minor items that are missing that will have to be replaced. Pumps are included (motors missing). Cost includes removal. Ready to ship - Loading fee will apply.

Place Holder
Item 8080 - Solvent Extraction Plant 125 MTPD
Manufacturer
DeSmet
Model
Model 3
Capacity
125

DeSmet edible oil solvent extraction plant - complete. Capacity 125 MTPD (could get to 150 MTPD). Horizontal bed. This complete plant has already been removed and is ready to load. DeSmet solvent extractor Model 3, DT, all solvent recovery/distillation equipment. Includes pumps and piping but our recommendation is to renew those. Extractor has been refurbished internally and needs blasting/painting externaly. The DT is in good shape. Electrics are 3/60/460v. Price includes loading on your trucks or containers.

Place Holder