Packaging & Manufacturing Consulting
Efficiency Capability, Productivity

Categories

Locations

View items per page
Sort by
Item 5719 - Bleach Finishing Tank
Manufacturer
tank ss
Model
ss
Capacity
186

Stainless steel finishing tank for bleaching. 3' diameter, OAH 7'. 3.5' seam to seam. 3" inlet, 2" outlet. Includes RTD and high/low level switches. Part of bleacher system item 5766.

Place Holder
Item 5973 - Butter Melter
Manufacturer
Scandinox
Model
Capacity
792

Butter melter, stainless steel jacketed. Scandinox 3000 liters (792 gallon) capacity. Serial # 0.5885, built 2000. MAWP primary chamber 3.5 bar at 100C, secondary chamber 3.5 bar at 100C. Designed to melt butter at duty of 2100 kg/hr.

Place Holder
Item 5779 - Condensate Receiver Tank ss
Manufacturer
Model
Capacity
120

Condensate Receiver Tank. Vertical stainless steel with side lug mounting. Has site glass in side. Approx size 22" dia x 6 ft. Approx. 120 gallons

Place Holder
Item V-220 - Flash Tank ss
Manufacturer
Model
Flash Tank
Capacity
400

Flash Tank, Vertical Tank, material 304 stainless steel. Approx size 44 in dia x 62 in tall for 400 gallons capacity. Insulated, flat bottom

Place Holder
Item 8202 - Horizontal tank
Manufacturer
Model

Horizontal ss 304 tank, on legs, sanitary manhole at end

Place Holder
Item 5860 - Jacketed Tank SS
Manufacturer
Mueller
Model
Capacity
7000

Jacketed Stainless Steel Tank, Mueller, 1983, S/N P9328-14. Approx. 7000 gallons

Place Holder
Item 5965 - Mix Tanks ss 1300 gal
Manufacturer
Model
Capacity
1257

Stainless steel mix tanks, jacketed. On legs. With top entering sweep agitator. Size is 82" OD x 76" ID dia x 5'-4" straight side. For approximately 1300 gallon capacity. There are TWO tanks - priced EACH

Place Holder
Item 8094 - Precondenser
Manufacturer
Apache
Model

Precondenser Designed for 5 psi/FV @ 212 Deg F but not ASME Code Stamped. Shell: 60" dia x 54 ft s.w., 1/4 inch 304 s/s with vacuum rings as required. Heads: 60 inch dis ASME f&d, 1/4 in 304 s/s, Manway: (3) 20 inch 304 s/s tube turn manway, Supports: CS skirt, blasted and primed. Finish: Tank interior and exterior will have a mill/plate surface finish with welds relatively smooth, continuous, crack and crevice free and will remain as-welded. Empty weight: 14,300 pounds

Item 5873 - Rectifier Feed Tank SS
Manufacturer
Model
Capacity
1470

Rectifier Feed Tank, Stainless Steel. Approx. 1470 gallons. 5 ft dia x 10 ft with 19" cone & flange

Place Holder
Item 7173 - Scrubber
Manufacturer
Elliott
Model
Scrubber
Capacity
2000

Stainless steel 304 scrubber vessel with spray nozzle at top and integral heat exchanger at bottom (optional - can be left off). Model is Elliott Swirl Jet, serial # E-7704. Heat exchanger is cs shell, ss tubes. Scrubber dimensions are 56 inch dia x 16 ft - 6 in s/s for capacity of approx. 2000 gallons. Designed to ASME specs rated at full vacuum. Dry weight approx 3213 pounds + 3,000 pounds HEx = 6200 pounds approx

Place Holder
Item 5878 - Skirted Liquid Tank SS
Manufacturer
Dixie Steel & Supply
Model
Capacity
10470

Skirted Liquid Tank - Stainless Steel. 9 ft dia x 22 ft L approx 10470 gallons. Dixie Steel & Supply S.O. 82-2490. 1983

Place Holder
Item 5879 - Skirted Liquid Tank, SS
Manufacturer
Model
Capacity
16900

Skirted Liq Tank - Stainless Steel. 12 ft dia x 20 ft L. Approx 16900 gallons

Place Holder
Item R1-S6 - Sludge Tank
Manufacturer
Model
Capacity
29

Rectangular Tank, Stainless Steel on legs. 26" x 24" x 11". Approx. 29 gallons.

Place Holder
Item R1-S5 - Sludge Tank
Manufacturer
Model
Capacity
27

Rectangular Tank, Stainless Steel on legs. 26" x 24" x 10". Approx. 27 gallons.

Place Holder
Item 8203 - SS Mix Tank High Shear
Manufacturer
Model

Single wall vertical stainless 304 tank, on legs with high shear mixers, CIP spray ball, top entering manhole

Place Holder
Item 5839 - SS RO Tank
Manufacturer
Model
Capacity
4200

SS RO Tank, 104 inches dia x 9 ft tall. Approx 4200 gallons.

Place Holder
Item 5972 - Stainless Steel Jacketed Tanks 1200 gal
Manufacturer
Cherry Burrell
Model
EPD
Capacity
1214

Vertical stainless steel jacketed tanks, on legs. Top entering agitator with sweep blades and baffles. Includes CIP spray balls. Cherry Burrell tank model EPD. Serial of one is 1000-61-908. Size ID 69" x OD 75" x 75" straight side (calculates to be 1,214 gallons each tank). OAH 9 ft - 10". Qty (2) - priced EACH

Place Holder
Item 5966 - Stainless steel mix tank 2200g
Manufacturer
Feldmeier
Model
Capacity
2200

Vertical stainless steel mix tank, on legs. Jacketed. Size is approx 8 ft dia x 6 ft tall straight side for capacity of 2200 gallons. Top entering agitator, cone bottom. Feldmeier tank built 2003. Atmospheric tank, jacket rated at 100 psi at 350F.

Place Holder
Item 5967 - Stainless steel mix tank 600g
Manufacturer
Feldmeier
Model
Capacity
600

Vertical stainless steel mix tank on legs. Size approx 5 ft-2" dia x 4 ft tall for capacity of 600 gallons. Feldmeier tank ASME stamped jacketed. Jacket rated at MAWP 100 psi at 350F.

Place Holder
Item 7450 - Stainless Steel Slurry Tank
Manufacturer
Sylacauga Tank Corp.
Model
1000 gal
Capacity
1000

1,000 gallon 304 SS slurry tank. Built 1992 by Sylacauga Tank Corp. SN #7088, atmos. Service. Three tier turbine 304 ss agitator and side mounted baffles. Vessel has a flat top, and dish bottom and mounts vertically by lugs. Diameter is 64" x 74 " straight side. Shell and bottom thickness is 0.188", Dish radius is 57, head thickness is 0.313". Tank has a 2" center bottom outlet and a 2.5" weld neck outlet at the top of the side for overflow. Top Openings include the following: Two 8" weld neck flanges, Two 2" flanges, One 3" flange, Three connections, flanged form 1" through 1 & 3/4". Vessel also has an eight inch opening with a product screen,(4x4) and an access door18" x 24" with hinges. Agitator drive is by Lightnin, Model 74C, 7.5, 31-1 drive ratio, 56 rpm output shaft, 7.5 hp motor, Mixer features a reliance motor 1775 rpm, 7.5 hp, 3 phase, 60 hz, 460 v.

Place Holder
Item 7427 - Stainless Steel Tank
Manufacturer
Cherry-Burrell
Model
Stainless
Capacity
1850

Sanitary Stainless Steel tank - 1850 Gallon, 316 SS, sanitary vertical storage tank. Manufactured by Cherry-Burrell, Serial Number E -305-93. Rated atmospheric internal. Size approx 90" diameter x 64" straight side with welded dish top, slight cone bottom. With top mounted off-set agitator, manufactured by Lightnin, with 3 blade pitch paddle turbine mixer. Openings Include: Top - 18" top manway with hinged cover, off center 6" drive nozzle, (1) 3" vent, (3) 2"; 2" center bottom outlet with flush bottom ball valve. Mounted on six legs with load cells. Load cells are Mettler Toledo Flexmount Model 0745A. No local readout panel included. Includes a 304SS ladder to access top man way. Built 1993, empty weight 1800 lbs.

Place Holder
Item 8001 - Stainless Steel Tank
Manufacturer
Model
Capacity
7500

NEW Stainless Steel Tank, Capacity (approximate): 7500 gallons, Size 8 ft O.D. x 19 ft Straight, Design pressure given as atmospheric, design temperature 200 degrees F. Shell is 3/16 in. 304/L SS, Heads are 3/16 in. nom. ASME F&D 304/LSS, Nozzles are quantity three (3) 2 inch RFSO and one (1) 12 inch RFSO. Support legs and lifting lugs are carbon steel. 24 inch Manway, External carbon steel is sandblasted and painted with one coat of shop primer. This is a brand new constructed tank so any nozzle placement, size, number can be as customer wished. Lead time: 7-9 weeks - negotiable.

Item 7994 - Stainless Steel Tank
Manufacturer
Model
Capacity
1165

Used 1165 Gal. Stainless Steel Jacketed Mixing Tank with Inside diameter of 69 inches, Inside height of 72 inches, Capacity of 1165 Gallons, Jacket thickness of 3 inches, Inlets: (2) 2", 2-1/2", 3", Outlet: 3-1/2", Jacket inlets: 3-1/2", (2) 1-1/2", Jacket outlets: (4) 2"

Place Holder
Item 5866 - Syrup Tank, SS
Manufacturer
Model
Capacity
50000

50,000 gallon tank - Syrup tank Stainless steel with mixer. Wt. 24000 lbs. Dims: 19 ft dia x 22 ft tall

Place Holder
Item 7892 - Tank 2000 gal
Manufacturer
Model
Capacity
2000

Mixing tank, 2,000 gallon, 2- 3" clamp and 1- 2.5" clamp outlet, dome top with manway, and vent, 1- 2.5" and 3- 1.5? top clamp inlets, 78"Dx120"T

Place Holder