FSI bag filter 2-bag, stainless steel. Takes #2 bags. Qty (2) - priced separately

Alfa Laval PX60 centrifuge. Model PX60 VGD 14 CGH 60. Capacity approx 14,000 lb.hr - was running on veg oil for both primary separation and for degumming. 2 phase. Ser num 4077200, built 1994. Max bowl speed 6235 rpm. Max feed density 1040 kg/m3. Approx 30HP motor with soft start. Includes controls, tools, water harness. Idled in 2020. See complete nameplate data in Link.

Alfa Laval PX65 centrifuge, sn 4201906-2011. Capacity approx. 22,000 lb/hr. Max speed 7500 rpm. Max density feed 1100 kg/m3. Includes tools, water harness, controls and VFD. Driven by 40 HP motor. Used for primary separation and degumming - 2 phase operation. Built 2011, still in operation. See data plate info and actual operation video in Link.

New stainless steel feed conveyors with motors for Krupp expellers. Qty (2) - priced separately

Stainless steel conveyor, size 24" x 20 ft long. Has hinged top covers

Housing only - no screw. U-Trough stainless steel housing 10 inch. Has flanged discharge

V-trough screw conveyor, stainless steel. Size 10" x 10 ft long. Heavy duty 1/2" pitch screw

Shann expeller Model 8-99

Sperry plate and frame filter presses. Mfg DR Sperry & Co, manual clean cast iron presses. Plate count (27) 30.5" x 30.5", non-gasketed. Approx 33 sq ft surface area. Center feed - corner outlet. Size 30, type 27-28. Rated pressure 100 psig. These are complete functioning units. Quantity (2) - priced separately

Regererative Thermal Oxidizer (RTO) rated at 1,200 scfm - expandable to 1,500 scfm. Mfg by Ship & Shore. 95% TE (media thermal effectiveness) and 98% DE (Destruction Efficiency rating). The refurbished 1,200 SCFM Regenerative Thermal Oxidizer (RTO) is equipped with an Exhaust Stack, 95% Media Thermal Effectiveness, Insulated Combustion Chamber, Insulated Dual Bed Media Chambers and Stainless-Steel Media Supports, and has a Destruction Efficiency Rating of 98%. Can be equipped with a New Controls System for additional cost (Including New Gas Train for Burner Operation to meet Industry Standards such as FM & NFPA 86 and New UL Approved Control Panel) and a New Variable Frequency Drive (VFD) for RTO Main Blower.

Regererative Thermal Oxidizer (RTO) rated at 56,000 scfm. Mfg by Ship & Shore. 95% TE (media thermal effectiveness) and 98% DE (Destruction Efficiency rating). The refurbished 56,000 SCFM Regenerative Thermal Oxidizer (RTO) is equipped with an Exhaust Stack, 95% Media Thermal Effectiveness, Insulated Combustion Chamber, Insulated Dual Bed Media Chambers and Stainless-Steel Media Supports, and has a Destruction Efficiency Rating of 98%. Can be equipped with a New Controls System for additional cost (Including New Gas Train for Burner Operation to meet Industry Standards such as FM & NFPA 86 and New UL Approved Control Panel) and a New Variable Frequency Drive (VFD) for RTO Main Blower.

Regererative Thermal Oxidizer (RTO) rated at 7,500 scfm - expandable to 10,000 scfm. Mfg by Ship & Shore. 95% TE (media thermal effectiveness) and 98% DE (Destruction Efficiency rating). The refurbished 7,500 SCFM Regenerative Thermal Oxidizer (RTO) is equipped with an Exhaust Stack, 95% Media Thermal Effectiveness, Insulated Combustion Chamber, Insulated Dual Bed Media Chambers and Stainless-Steel Media Supports, and has a Destruction Efficiency Rating of 98%. Can be equipped with a New Controls System for additional cost (Including New Gas Train for Burner Operation to meet Industry Standards such as FM & NFPA 86 and New UL Approved Control Panel) and a New Variable Frequency Drive (VFD) for RTO Main Blower.

Static Mixer, Kenics. Used for short time but condition excellent - suitable for food use. Kenics Model 1-KMS-6 Rated for 12 bar pressure at 150C. Material ss316. Serial Num 016068-01-1. Size 1 in dia pipe. Flow range 0.5 to 15 gpm depending on viscosity - see link for brochure and viscosity chart. The KM static mixes helical mixing element directs the flow of material radially toward the pipe walls and back to the center. KM static mixers provide precise blending and dispersion of all flowable materials, without utilizing moving parts.

Horizontal stainless steel tanks, size approx 6 ft dia x 20 ft tall for capacity of 4,200 gallons. Qty (5) - priced separately

Poly vertical tank approx 8'-3" dia x 14' side wall for capacity of 6,000 gallons. Tank has molder 2" flanged outlet, 6" flanged heater port at the bottom and a 2" fill line flange.

Vertical cone bottom tank on legs. Size approx 6 ft dia x 14 ft straight wall for capacity of 3,500 gallons.

Vertical stainless steel tank, flat bottom and sloped top. Size approx 9'-6" dia x 19'-8" tall for capacity of 10,500 gallons.

Portable truck loading platform access stairway with cage. Adjustable height. Aluminum construction with casters