Packaging & Manufacturing Consulting
Efficiency Capability, Productivity

Categories

Locations

View items per page
Sort by
Item 8053 - Biodiesel Plant 1 MGY
Manufacturer
Model
Capacity
1

Biodiesel Plant - entirely moveable, in containers: Complete 1 MGY (million gallons per year) biodiesel plant built in 2008 by Progressive Recovery, Inc. Designed to produce biodiesel with lower cost and higher ffa used cooking oil (UCO). Idled in 2011. This plant did produce and sell biodiesel to spec. This plant is self-contained within two 40-foot shipping containers. One container is used to filter the incoming oil and the other is used for the biodiesel production. Includes the trailers under the containers. Must be relocated.

Place Holder
Item 7530 - Distillation Column 12"
Manufacturer
Paul Mueller
Model

12" distillation column - NEW, never used. Suitable for food and pharmaceutical use. Manufacturer Paul Mueller S/N 357209-91, built in 2007. Designed as Secondary Glycerin Distillation Column. Stainless steel 304L - ASME Nat'l Bd # 43307, MAWP 50 PSI internal/full vacuum internal at 450 deg F. Insulated with foam-glass and stainless steel sheathing. Size 12.75" OD x Overall height 23 ft 5.875 inches, no jacket, insulated, 4 sections. See drawing and U-1 form links.

Place Holder
Item 7533 - Reverse Osmosis Unit (RO)
Manufacturer
APV
Model

Reverse osmosis unit by APV Stainless Steel 8-Tube UF/RO Rack, Food grade. Suitable for food and pharmaceutical use. Membrane cartridges are still installed - rated to 0.3 micron (will have to verify). Capacity: 88 Gallon. Tube dimensions: 4 in. dia. X 17 ft. 4 in. L. Stainless Steel Jacketed Tube, capacity: 0.3 gal. Inlets: (1) 1-1/2 in. dia. S-line (media), (1) 2-1/2 in.dia. I-line (product). Outlets: (1) 1-1/2 in. dia. S-line (media), (1) 1-1/2 in. dia. S-line (product), (1) 3 in. dia. S-line (product). Overall dimensions: 18 ft. 3 in. L x 3 ft. W x 7 ft. 9 in. H. UF/RO Rack SS 8-Tube

Place Holder
Item 7531 - Thin Film Evaporator 26sf
Manufacturer
Cherry Burrell Votator
Model
18-072

Turba-Film Thin Film Evaporator, Manufacturer Cherry Burrell Votator, Model 18-072, ser # 91229EA. Suitable for food and pharmaceutical use. Material 316L Stainless Steel. Food grade. Used - built 1991. Has 26 square feet heat transfer area. ASME MAWP shell FV at 400F and jacket 150 psi at 400F, Nat'l Bd# 1209. (1) 18 in. Diameter x 72 in. long vertical chamber with a 4 point rotor. Internal rated FV at 40 to 400 degrees F. (1) Carbon steel thermal section rated 150 psi at 40 to 400 degrees F. Has a 2" Tri-clamp feed, 10 in. vapor outlet, 2 in. tri-clamp bottom outlet. Driven by a 25 hp, 3/60/230/460 volt, 1170 rpm motor. Also Includes an Industrial Process Equipment 133 square foot vertical shell & tube heat exchanger, model 1ST10-96. 304 Stainless steel tubes, carbon steel shell, ASME MAWP 150 psi at 300 degrees F, Nat'l Bd# 1050.

Place Holder