Packaging & Manufacturing Consulting
Efficiency Capability, Productivity

Categories

Locations

View items per page
Sort by
Item 1716 - Decanter CB-505
Manufacturer
Westfalia
Model
CB-505-71-32

Westfalia solid bowl horizontal decanter centrifuge. 2 phase, Model CB-505-71-32 sanitary. Used. Bowl 500/265 mm/19,685" diameter x 84" long. Centripetal pump discharge with GEA Varipond P design for adjusting pond depth on the fly. T316L stainless steel contact surface. Main drive 120 HP (90KW). Back drive 20HP. Max bowl speed 3500 rpm. Lube system with pump and plate exchanger, casing, and frame. No stand, no controls. Priced As Is - will need a stand. We can also recondition for you

Place Holder
Item 1732 - Decanter Centrifuge NX-314
Manufacturer
Alfa Laval
Model
NX-314

Centrifuge - Alfa Laval NX-214/314. On skid, includes starters. - 14? x 34? bowl dimensions - 8.5 degree beach angle - Max. RPM: 4,000 max. RPM - Max G-force: 3,180 x G - 316 SS product contact areas - Tungsten carbide tiled conveyor - 110 mm conveyor pitch spacing - 2.5 kN-M, 159/1 ratio plantar gearbox - Trip-arm device - 25 HP motors, dual voltage 230/460/3/60. - Machines were operational when pulled from service. Quantity available (2) - priced separately

Place Holder
Item 6718 - Expander
Manufacturer
Tecnal
Model
8 inch

Tecnal 8 inch expander. Used condition - Nice, cleaned, sand-blasted and painted. Includes 150hp motor and guard for V-belt drive (No belts). The machine was last run on cracked soybeans and was doing a great job for them. The reason it was removed was because the owner wanted to standardize on a different brand throughout his plant. This unit does come with a 150 HP and can be used as an extruder to condition, rupture, and shear the soybean oil cells prior to going into the expeller press or it can be used as an expander (with some modifications) to make porous collets prior to solvent extraction.

Place Holder
Item 5383 - Extruder
Manufacturer
Dox
Model
8 inch

Dox 8" Extruder. This machine was last used on cotton seed to feed 2 Anderson 33 Duo expellers. Used, As Is, Excellent conditionThis unit comes with its feeder, dog leg chute with magnets, and 150 HP motor. Unit has been cleaned, sand blasted, primed and painted.

Place Holder
Item 1739 - Flaking Mills (2)
Manufacturer
French
Model
24 x 52

French Flaking Mill Model 24 x 52 (used, good condition. Have been cleaned, primerd, painted. - Extra-Heavy Carbon Steel Construction - Complete with vibratory feeder - Hydraulic power pack - Cog Belting drive (like timing belts) - 125 HP Motor, 1200 RPM. - Does not include power-grip / timing belt. Quantity (2) avaiable - priced separately

Place Holder
Item 5384 - Flaking Mills (2) & Roll Grinder (LOT)
Manufacturer
Roskamp
Model
26 x 62 RGS10

Two Used 28 x 62? RGS10. Roskamp Flaking Mills, (1) Roskamp Roll Grinder with 28 x 62 rolls used, (1) Roskamp Roll 28 x 62 NEW spare roll, (1) 150 HP motor - all available as a "LOT". complete with feeders, magnets and motors. - Extra-Heavy Carbon Steel Construction - Roskamp 2800 Flaking Mills Model SP-2800x62 - 28 inch Diameter X 62 inch Long, Chilled, Cast Iron Rolls - Mill Frame Constructed of Ship Channel and High-Strength - Self-Aligning, Spherical Roller Bearings - Heavy Duty Power Grip Drive - With Differential Drive - Accumulator Roll Protection - Hydraulic Roll Tension with Positive Stops - Adjustable Motor Base - Adjustable Roll Scraper Assemblies - Central Greasing System - One Hydraulic Pump with Control - Corrugated Roll Feeder - 150HP/3PH/50HZ/220/380/440V/1500RPM/TEFC/Motor. All in Very Good Condition. Units have been cleaned, sandblasted, primed, painted. Ready for inspection and shipment. - a skidding/loading fee will apply.

Place Holder
Item 8084 - Heat Exchanger, Shell & Tube 1819sf
Manufacturer
Thermotran
Model
Capacity
1819

1819 sq ft Heat Exchanger, Mfg by Thermotran. Tube & shell material: Carbon steel. Shell Pressure 150 psig, Shell Temperature 150 degrees F. Tube Pressure 1040 psig, Tube Temperature 355 degrees F. Shell Pass: 2, Tube Pass: 2, Tubes 340. Length 30 feet. NB#139, S/N H-1441, Wt: 15,900 lbs.

Item 7259 - Heat Recovery Boiler 800 HP
Manufacturer
Rentech
Model
.
Capacity
800

27,587 Lbs/Hr. (800 HP), 290 PSIG MAWP, RENTECH Heat Recovery Boiler, Water Tube Design with Hoppers. Year 2012. UNUSED Surplus, Never Installed. Constructed in strict accordance with ASME code Section I, 2010 edition, 2011 addenda. Stamped and registered with the national board. MAWP: 290 PSIG/FV; Hydrotest Pressure: 435 PSIG; Design Temperature 500?F (700?F TUBES); Weight: 65000 LBS (Dry) 92000 LBS (Full) 87000 LBS (Operating). Dimensions: 23'-6" L x 8'-3/4" W x 13'-3" H. Built Year 2012. Includes Hoppers, Boiler trim and Catwalks. See Drawings for more details. Available Due to Cancelled Project. This is Unused Surplus equipment in excellent condition.

Place Holder
Item 7294 - LeRoi Gas Compressor Skid Packages
Manufacturer
LeRoi
Model
MHGF12000

LeROI Model MHGF 12000 Gas Compressor SKID Packages - NEW, old stock. There is some weathering on the units but they have been inspected and the screws are still lubricated. Skid 88 in x104 in welded steel with 2 in drip edge. Compressor rotor twin screw diameter 127.5 mm. Drive motor 40HP TEFC 230/460V 60Hz belt drive w/guard, inlet scrubber. Starter / control panel with shutdowns, all plumbing & electrical wiring, all drains & piping connections to edge of skid. Please see the attached pdf's for drawings and parts list. These units were fabricated in 2009 and never put in to service. The application these units can be used for: gas gathering, well head gas compression, fuel gas boosting, vapor recovery, inlet gas boosting, and landfill gas. Weight 6,000 pounds each. Ready to Load. Three skids available - priced separately, Price includes loading. Discount if multiple units are purchased.

Place Holder
Item 2038 - Plate & Frame Filter 240sf
Manufacturer
Albers
Model
.

Plate & Frame filter press, cast iron manual operation. Has 30 leaves at 2 ft x 2 ft for filter area of 240 sq ft. Each leaf has 1.5" space between it and the frame allowing 15 cu ft max cake - operating would be closer to 10 cu ft cake. Inlet on one end and each cloth/leaf has a hole in upper corner. Outlet hole on bottom corner of leaf for discharge; Each leaf will be fitted with a nipple and 90 degree elbow for discharging into trough. Physical size 4 ft wide x 12 ft long x 4 ft tall. We can furnish filter cloth. Has been cleaned and painted. Serial number 1N06955.

Place Holder
Item 6018 - Plate Heat Exchanger 6,313sf
Manufacturer
Alfa Laval
Model
AX35-FG
Capacity
6313

Alfa Laval Plate heat exchanger. Model AX35-FG. 6313 SF. A series of vertical corrugated heat exchange plates are held together between the end plates of a horizontal screw compression type frame. The plates are separated by flexible, O-ring type, gaskets. Process fluid and heat exchange. Model AX35-FG. 6313 SF. PLATES:316SS, FRAME:CS, PLATES:295 @ 0.5 mm thick plates approx., FRAME CAPACITY:Pack length min. 45.5'' approx., 150# MAWP @ 225?F. ASME N.Bd., 14? in/out. 1-pass., PRIOR SVC:Cooling water vs vessel jacket water

Place Holder
Item 2025B - Pressure Leaf Filter Horizontal 412 sf
Manufacturer
Industrial Filter
Model
60-4-16
Capacity
412

Reconditioned Industrial Filter Horizontal pressure leaf filter press, Model D, Series 60-4-16, Type 122.902, Filtration area 412 sq ft. Tank dia: 60 inches dia Includes Set of 16 filter elements (leaves) 5-Ply with wire mesh, All stainless steel leaves. Used leaves in great condition. Hydraulic power pack with oil reservoir and 5 HP pump, basic controls to open/close bundle of leaves and door. Pneumatically operated vibrator. Hydraulic cylinders with oil piping. A-frame and beams are included. Unit will be sandblasted, primed, and final painted.{photos of finished unit are representative of what this one will look like after reconditioning}. Delivery approx 4-5 weeks. Quantity available (2). Priced separately, discount offered if both are purchased.

Place Holder
Item F20820 - Pressure Leaf Filter Horizontal 516sf
Manufacturer
Industrial Filter 516sf
Model
60-6-20
Capacity
516

LOT: 2 filter presses and ONE set of leaves (20). Industrial filter press, Series 60-6-20 Horizontal pressure leaf filter. Has 516 sf filtration area. Built for a project in 1994 and never used. Note that these are NOT reconditioned - In good shape, cleaned and primed but will need refurbishment. Type 122.902, Serial F-20818. ASME Nat'l Bd# 3627 , rated at 70 psi at 310F. No A-frame or trolleys. No hydraulic power pack. Approximate size 6 ft wide x 15 ft long x 8 ft tall, Empty weight 6800 pounds. Both presses and filter leaves are used. See LINK for drawing os a representative filter - not the exact one. These are single filter units, not head-to-head. Price quoted is As Is loaded on your truck. This price is for the LOT.

Place Holder
Item 2025C - Pressure Leaf Filter Horizontal 412 sf
Manufacturer
Industrial Filter
Model
60-4-16

Industrial Filter Horizontal pressure leaf filter press, sold Used As Is. Model D, Series 60-4-16, Type 122.902, Filtration area 412 sq ft. Tank dia: 60 inches dia Includes Set of 16 filter elements (leaves) 5-Ply with wire mesh, All stainless steel leaves. Used leaves in great condition. Hydraulic power pack with oil reservoir and 5 HP pump, basic controls to open/close bundle of leaves and door. We can replace hydraulic cylinders and seal at additional cost. Removed, ready to load for immediate delivery. Quantity available (2). Priced separately although we can give discount if both are purchased.

Place Holder
Item 5191 - Pressure Leaf Filter Vertical 600sf
Manufacturer
Industrial Filter
Model
122.902
Capacity
600

Vertical Pressure Leaf Filter - Reconditioned.(orig build 2008 by Industrial Filter) Surface Area 607 Sq. Ft. (60 Sq. Mtrs). Series 66-68-607 Model 122.902, 66 inch Diameter Vertical Tank. Includes all 14 stainless steel filter leaves, carbon steel body complete with 30 inch pueumatic automatic outlet butterfly valve. This filter has 14 leaves with 4 inch spacing. ASME Nat'l Bd # 2242 & 2243, MAWP Pressure 70 psig at 310F . Serial Nos. Y08-100 and Y08-101. Qty (2) available, priced separately. Discount available if you take both.

Place Holder
Item 5380 - Rotary Steam Dryer
Manufacturer
Davenport
Model
.

96 inch dia Davenport Rotary Steam Dryer. Used Rotary Counter Flow Steam Tube. Shell & tube: 304 stainless steel. 104? OD x SCH.10. Pitch 0 DEG to 32 DEG. 46?9 O.A.L. 30HP motor, 349 RPM. Batch capacity: 80,000 lbs./hr. Shell rated for 1 ATM of pressure @ 370F. Tube rating 175PSIG @ 370F. Steam Rating: 130PSIG. Manufactured by Davenport. Previous Use: PTA Dryer.

Place Holder
Item 1449 - Tricanter NX934
Manufacturer
Alfa Laval
Model
NX934
Capacity
70

Alfa Laval Tricanter NX934 3 phase rated at 10-20 m3/hr (2,641 to 5,283 gpm). Reconditioned NX934-11G 3-phase heavy phase R 148mm, light phase R 137 mm, Bowl diameter 450x2100 mm with tungsten carbide tiles, bowl speed max 3250 rpm. Beach angle: long 6 degree, adjustable weir. RCF (g-force) is 2661 Recondition rotating assembly, bearings, seals, O-rings, balanced. Rebuild gear unit. Sandblasted, carbon steel items painted. New 75 HP main drive, add new 25HP AC motor for back drive. New control panel with programming and VFD, Includes vibration switch. Test run with control panel Photos show as is - will be reconditioned - priced as reconditioned. See Link for specifications Allow 8-9 weeks ARO

Place Holder