Packaging & Manufacturing Consulting
Efficiency Capability, Productivity

Categories

Locations

View items per page
Sort by
Item AC-7501A - Air Compressor w/regenerative dryer
Manufacturer
Atlas Copco
Model
GA75+

Air compressor Atlas Copco rotary screw GA75 410 cfm each at 150 psi. Includes regenerative air dryer for dry air to -40 pdp. Driven by 100 HP motor. Last used as plant air compressor

Item AC-7501B - Air Compressor w/regenerative dryer
Manufacturer
Atlas Copco
Model
GA75+

Air compressor Atlas Copco rotary screw GA75 410 cfm each at 150 psi. Includes regenerative air dryer for dry air to -40 pdp. Driven by 100 HP motor. Last used as plant air compressor

Item AC-7502 - Air Compressor w/regenerative dryer
Manufacturer
Atlas Copco
Model
ZE4B

Atlas Copco rotary screw ZE4B. Rated at 50 psig with 150 HP motor. Includes air dryer

Item DC-1631 - Baghouse Filter
Manufacturer
MAC
Model
96LST96

MAC baghouse filter for hammermills. Model 96LST96 with blower fan and ductwork, horizontal exhaust stack. Used as hammermill baghouse

Item DC-1632 - Baghouse Filter
Manufacturer
MAC
Model
96AVS16

MAC baghouse filter for hammermills. Model 96AVS16 with blower fan and ductwork, horizontal exhaust stack. Used as scalper baghouse

Item C-4101 - Beer Distillation Column
Manufacturer
SpecFab
Model
ss

Beer Distillation Column, size 72"ID X 108"ID X 69'-6" tall seam/seam. 27 tray distillation column. Mat'l ss304. MAWP 50 psi and fv at 300F. Includes all instrumentation, valves, piping, ladders, grating on this column. Built 2007. See links for full tank drawings.

Item PK-1111 - Boiler House Feedwater System
Manufacturer
Model

Boiler house feedwater system. Includes Water softener Z-7302, 30,000 gallon soft water tank TK-7301, (2) softwater pumps PC 7301 and PC-7302, deaerator and boiler feedwater pumps Z-7202. All detailed separately under their asset numbers.

Item PC-5107 - Centrifugal Pump
Manufacturer
Goulds
Model
3196
Capacity
300

Goulds 3196 centrifugal pump rated at 300 gpm at 135 TDH. Size 3x4-13. Driven by 40 HP motor. Last used for corn syrup. Part of Oil loadout system ME-5102 and not sold separately at this time.

Item PC-7301 - Centrifugal pump
Manufacturer
Goulds
Model
LF3196
Capacity
20

Goulds 3196 centrifugal pump model LF3196-STX 1x1.5-4 with 4.12" dia impeller. Design rating 20 gpm at 55 TDH. Ser no. A734F836. Weight 244 pounds. Built 2007. Last used for soft water feed pump. Part of boiler feedwater system PK-1111 and not sold separately at this time

Item PC-7302 - Centrifugal pump
Manufacturer
Goulds
Model
LF3196
Capacity
180

Goulds 3196 centrifugal pump model LF3196-STX 2x3-6 with 4.875" dia impeller. Design rating 180 gpm at 81 TDH . Ser no. A734F837. Weight 370 pounds. Built 2007. Last used for soft water feed pump. Part of boiler feedwater system PK-1111 and not sold separately at this time

Item CHR-7102 - Chiller 2766 ton
Manufacturer
York
Model
YK Max E

Chiller 2766 tons, York, model YK Max E. Motor 1463 HP 4160v 3/60, Includes Evap & condenser. Serial number YKTHVBJ4-DHFS. Chilled water tank 10,000 gallons capacity also available for additional (See TK-7103)

Item PK-3201 - CO2 Scrubber System
Manufacturer
SpecFab
Model
ss

CO2 Scrubber System. CO2 scrubber size: 60" ID x 31'-11" s/s tall, Vent gas scrubber size 48" OD x 31'-11" s/s tall. stack. Material ss304. Includes structural towers for both columns, Goulds 3196 size 1.5x3-6 PC-3201 centrifugal pump, Kice 15HP blower BL-3202, knock out pots, and all instrumentation and valves associated with this system.

Item Z-7202 - Deaerator & Feedwater Pumps
Manufacturer
Superior
Model
TC150T135-100

Deaerator system mfg by Superior. Superior Triplex Tray Deaerator Model TC150T135-100. ASME certified and stamped, U-1A certs available. Nat'l Bd # 16215 & 16215. Designed for 150,000 #/hr, pressure 50 psig at 400F, deaerator capacity 3,075 gallons. Mat'l cs SA-516-70. Horizontal tank 84" OD x 13.75 ft OAL. Vertical deaerator tank on top is 72" OD x 9.25 OAH. Both sit in a structures with (3) Grundfos feedwater pumps. Dimensions of complete deaerator structure are 100" x 116" x 329" tall OAH. Includes all attached instrumentation, valving and piping manifolds. Grundfos pumps are model CR45-4-2. Each designed for 45 gpm, 4 stage driven by 30HP motor 460/3/60. Weight 18,000 pounds empty. Part of boiler feedwater system PK-1111 and not sold separately at this time

Item TA08 - Decanter Bowl
Manufacturer
Alfa Laval
Model
CHNX 706B-31G

Decanter Bowl, Alfa Laval, model Bowl for CHNX 706B-31G

Item CF-5101 - Decanter Centrifuge
Manufacturer
Alfa Laval
Model
CHNX 706B-31G

Decanter Centrifuge, Alfa Laval, model CHNX 706B-31G, 200HP primary motor. Bowl internal dia 737, 2800 rpm. Built 2007. Includes controls and control cabinet. Qty (3) - priced separately sn 5023459, 60, & 61.

Item PK-7000 - Ethanol Plant 55 MGY - Assets
Manufacturer
Delta-T
Model
.
Capacity
55

ASSETS ONLY for complete Ethanol Plant - This is an "intact asset sale" - all of the equipment and systems at this plant are being sold as one entity, no breakouts. Capacity 55 MGY (million gallons per year). The plant cannot stay in place and be run as an ethanol plant. We are selling complete assets as a package and all must be removed. Process is corn dry mix fermentation augmented by grain sorghum and non-cellulosic separated food waste (SFW). Plant design is a Delta-T originally built in 2007 - design modified by Ergon and restarted in 2015. Significant improvements have been made in the plant including a Fluid Quip system. The plant was idled on Sept 2018. It has been professionally mothballed. All of the equipment is still there, and this plant can be relocated into a full complete operating plant - much cheaper than starting from scratch with a greenfield location. Incudes GEA Barr Rosin ring dryer, Nestc RTO, (2) Superior 2200 HP boiler, Bliss 300HP hammermills, DDE with mole sieve, fermentation and in-process tanks. DCS and plc controls, FF&E, Distillation & Evap, cooling tower, 2766 ton chiller, (3) Alfa-Laval decanter centrifuges CHNX-706B, (3) other centrifuge/decanters associated with the Fluid-Quip process, (3) Atlas-Copco air compressors, electrical MCC's and switchgear. Complete list of equipment, specs, and drawings are available on request in our Virtual Data Room (VDR).

Place Holder
Item E-4504 - Evap Condenser shell/tube 12,595 sf
Manufacturer
DCR Construction
Model
cs/ss
Capacity
12595

Evaporative Condenser, mfg by DCR Construction. Horizontal shell & tube heat exchanger, 1 pass.. ASME Nat'l Bd# 238, MAWP shell 150 psi at 200F, tubes 50 psi at 300F. Sn 4504-7793. Size 71" OD x 264 inch long. Has 1785 tubes at 1/25 OD for 12,595 sf area. Built 2008. Mat'l shell cs, tubes ss304. Weight 54108

Item E-4501 - Evaporation Columns
Manufacturer
DCR Construction
Model
ss/ss

Evaps, Evaporation shell & tube columns. Approx size 6.6 ft OD x 52.5 ft tall with a skirt 12 ft OD x 15 ft tall. OAH approx 67.5 ft. Mat'l Shell & Tube ss304, skirt cs SA-516 Gr 70. Has 1369 tubes 1-1/2"dia x 480" long. MAWP tubes & shell 50 psig and FV at 300F. Evap has 3 inch fiberglass insulation. Includes all instrumentation, valves, piping, ladders & grating on this column. Empty weight 104,514 pounds. We have drawings - see link. Qty (3) evaps - priced separately

Item Z-7201A - Firetube Boiler 2200 HP
Manufacturer
Superior
Model
8-X-11000-S150-GPCF-G

Firetube Boiler, Superior Boiler Works Model 8-X-11000-S150-GPCF-G Natural gas fired, 2200 HP (73,645 MBTU) 150 psig. ASME Nat'l Bd# 16198. Scotch Marine type 2-pass. Cleaver Brooks burner model LNXLG-924. Physical size approx 492" L x 151" W x 136" T See drawing and manual for verification. Weight empty approx 121,000 pounds.

Item Z-7201B - Firetube Boiler 2200 HP
Manufacturer
Superior
Model
8-X-11000-S150-GPCF-G

Firetube Boiler, Superior Boiler Works Model 8-X-11000-S150-GPCF-G Natural gas fired, 2200 HP (73,645 MBTU) 150 psig. ASME Nat'l Bd# 16199. Scotch Marine type 2-pass. Cleaver Brooks burner model LNXLG-924. Physical size approx 492" L x 151" W x 136" T See drawing and manual for verification. Weight empty approx 121,000 pounds.

Item FQ-BOS - Fluid Quip BOS
Manufacturer
Fluid Quip
Model
BOS

Fluid Quip Brix Oil Separation (BOS) system designed to recover raw corn oil from the liquefaction slurry prior to fermentation. Designed to recover 1.0 lb of corn oil per bushel. Includes (2) clarifiers, (1) Triton centrifuge, (1) polishing centrifuge, (10) pumps, (1) paddle screener, (8) tanks. See Listing in link and separate spreadsheet for assets involved

Item FQ-SGT - Fluid Quip SGT
Manufacturer
Fluid Quip
Model
SGT

Fluid Quip SGT system prepares the mash and helps release oil from the germ. Includes (2) Grind Mills, (6) pumps, (6) paddle screens, (3) tanks. See listing in link. The SGT CC equipment and process is designed to grind wet slurry in conjunction with liquefaction to release more starch during liquefaction. The process is based on selectively grinding to reduce particle size and present a narrow distribution of particle sizes so that more starch may become hydrated and broken down to sugars during liquefaction. See flyer and separate spreadsheet for assets involved

Item HM-1631 - Hammermill 300HP
Manufacturer
Bliss
Model
3848-TF

Hammermills 300HP, Bliss Industries, model 3848-TF with 300HP motors (1800 rpm 460/3/60), 4800 sq in screen area. Includes 2HP variable rotary feeder top center feed inlet w/manual direction gate, ceramic stainless steel plate magnet SF-400HD 2.5" thk x 44". Hammermill Ser No. 6657 & 6658. Capacity of each hammermill 42,000 PPH (1500 bu/hr). Complete double hammermill system available, see asset PK-1631. Qty (2) hammermills available - priced separately

Item PK-1631 - Hammermill System 300HP
Manufacturer
Bliss
Model
3848-TF

Hammermill system including (2) Bliss 300HP hammermills, (2) Baghouses and blowers + interconnecting ductwork, (2) rotary valves, (2) ceramic plate magnets, (2) discharge screw conveyor 10 HP Thomas and hopper under hammermills, all structural steel & platforms. See the following asset number listings for more details and more photos of each piece in this system. Hammermills 300HP, Bliss Industries, model 3848-TF with 300HP motors + 2HP rotary feeder and ceramic magnet (Asset HM-1631), Baghouse filters and 25HP blowers (Asset DC-1631 & DC-1632), integral hopper and 10HP screw discharge conveyor (Asset Y-1631). Capacity of each hammermill system is 42,000 PPH (1500 bu/hr). We can furnish weigh scale and conveyors/legs as an additional option. See flyer and links.

Item E-2302A - Heat Exchanger Plate 4090 sf
Manufacturer
Alfa Laval
Model
Wide Gap 350S-FG
Capacity
4090

Mash Cooler #1, Alfa Laval wide gap model 350S-FG Mash-473,500 lb/h, Water-1,188,000 lb/h. Has 110 plates (1755mm w/210mm) for 4090 sf. Mat'l ss316. Serial number 30110-68345. ASME Nat'l Bd # 26343