Packaging & Manufacturing Consulting
Efficiency Capability, Productivity

Categories

Locations

View items per page
Sort by
Item cp120 - Air Receiver
Manufacturer
Silvan
Model
Capacity
350

Silvan Air Receiver - approx 2.5 ft dia x 10 ft tall. Capacity 350 gallons. Built 2005. MAWP 150 psi at 450F. ASME & CRN.

Place Holder
Item cp181 - Baghouse & Blower
Manufacturer
Model

Baghouse and blower - not available until summer 2017

Place Holder
Item cp176 - Blower Fan
Manufacturer
Robinson
Model
FRD

Robinson Fan. 63x12 3/16 Duplex CCW rotation. Approx sdize 136" tall x 1119" wide x 93" deep. Rated for 1780 rpm, 129,070 cfm (607HP), 22 fsp.

Item cp136 - Blower Fan
Manufacturer
AirPro
Model
RTHS630OX

AirPro fan Radial Tipped Fan, model RTHS630OX. Rated at 144,589 acfm at 400F, designed for 129,870 acfm at 400F. Max speed 1800, pn 1000144, max temp 450. Built 2009 & 2008. S/N 16580-1 (2009) and 16580-2 (2008). Designed for 800 HP motors - motors listed separately (see cp147). There are 2 available, priced separately.

Place Holder
Item cp146 - Blower Fan + 800HP
Manufacturer
Robinson
Model
RB1610-5

Robinson Fan, model RB1610-5. 77X 331/16 Duplex. Includes 800 HP motor Serial No. 273-04. Last use: Fluidized bed blower F-01

Place Holder
Item cp138 - Blower Fan 800HP
Manufacturer
AirPro
Model
RTHS630OX

AirPro fan Radial Tipped Fan, model RTHS630OX. Blower fan on hot air stack. Rated at 144,589 acfm at 400F, designed for 129,870 acfm at 400F. Includes 800 HP motor 1760 rpm, 460/3/60. Includes ducting and inlet / outlet.

Place Holder
Item cp142 - Boiler Controls
Manufacturer
Model

Boiler control panel with Allen Bradley panel view 1250 and panel view 1000

Place Holder
Item cp185 - Building, Pelletizing
Manufacturer
Model

Metal building and structure housing all Feeco peletizing system and 5 silos. Bulilding consists of 3 parts - and 2 levels. Part 1: building with all the equipment except the additives and electrical is 45 ft wide and 60 ft long. It is 48 ft at the peak 42 ft sides. Part 2: The electrical and tank lean-to building is 32 x 20 and Part 3: the additive building is 22x70. The area in the middle with the large tank is 75 ft tall give or take a foot or two. Total general sq footage on 1st floor is 4800 sf. This building has steel lining outside and inside with insulation in gap. Includes ventilation fans, doors, trim around openings. Second level includes 45 degree stairway, deck, and control room. Very well built, solid building. See drawings in links for general arrangement and elevations. We have complete building drawings and foundations specifications for potential buyer.

Place Holder
Item cp145 - Burner Management
Manufacturer
Model

Fluidized bed burner management and gas trains

Place Holder
Item cp141 - Control Panel
Manufacturer
Total Controlk (GE)
Model

Control Panel (bag house) and Total Control QuickPanel touch screen, used. Total Control was acquired by GE and is supported.

Place Holder
Item 151022 - Corn Syrup Idle Assets
Manufacturer
Model

Complete systems and idle assets from a corn syrup plant and pellet feed fertilizer mill. Most equipment bought new in 2006, then idled in 2012. 7 silos, Alfa Laval plate heat exchangers, 800HP Fan Blowers, bucket elevators and conveyors, hammermills, heat recovery steam generator (HRSG) boiler and economizer, stainless steel boiler stack with gas emissions monitor station. Sold as total systems or as separate pieces - available now. See Flyer and Equipment List in LINKS.

Place Holder
Item cp105 - Drag Conveyor
Manufacturer
Model

Drag Conveyor carbon steel, size approx 2 ft x 2 ft x 28 ft long.

Place Holder
Item cp153 - Economizer
Manufacturer
Rentech
Model

Rentech Boiler Economizer. Gas side designed for 304,613 lbs/hr at 425F. Steam side designed for 105,263 #/hr at 172 psig. Tubes 2", 120" m.w., SA178A material, tube arrangement, inline 12 streams, 1 inlet, 1 outlet. MAWP 250 psi at 500F (700F tubes). Size is 192 inch wide x 167 inch long x 76 inch tall (16 ft wide x 14 ft long x 6.3 ft tall). Dry weight 53,000 pounds.

Place Holder
Item cp190 - Feeder
Manufacturer
TecWeigh
Model

Proportional feeder TecWeigh model CR12 s/n 12065-0712.

Place Holder
Item cp144 - Feedwater & Softener System
Manufacturer
Model

Softener System - Deaerator & Tank system including (2) pumps LN 64, Grundfos designed for 350 gpm at 472 feed head, Driven by 60HP motor, 3500 rpm, 435 psi max, 356 F. For HRSG boiler and economizer

Place Holder
Item cp174 - Filter BagHouse
Manufacturer
Model

Small dust collectors (baghouses) Various Sizes. 5 available, priced separately.

Item cp175 - Filter BagHouse
Manufacturer
Model

Baghouses (larger dust collectors) - various sizes. 2 available, priced separately.

Item cp160 - Filter BagHouse
Manufacturer
MAC
Model

MAC baghouse. Model 120LST81. Large square top design, pulse jet filter. Filter area 1274 sf. 81 bags. . Dimensions 79 in x 79 in x 294 in tall with handrail. Length of cage 120 in. Hinged top doors. Designed for 17 in W.C. static pressure max. 60 degree hopper. Air flow is a function of the dust particle load on the incoming air, but this bag house should be able to handle a 4:1 to a 5:1 ratio to bagsf = 5,000 to 6,400 scfm incoming air stream. Physical Wt 5370 lbs

Place Holder
Item cp140 - Filter BagHouse Complete (6)
Manufacturer
Model

Complete Bag house, 6 modules. 3/16 in thick. All enclosed in building - it has (6) 20 ft x 20 ft bays x 60 ft tall. Each baghouse module is 15.5 ft x 12 ft. There are (6) available, priced separately. See links for design

Place Holder
Item cp150 - Fluidizer Bed
Manufacturer
Von Rol
Model

Large fluidized bed, fluidizer for corn syrup. Size approx. 40 ft dia x 60 ft tall. Has fire brick.

Place Holder
Item cp127 - Gear Box (2)
Manufacturer
Lightnin
Model
508C40T

Lightnin gear boxes - NEW not used. Model 508C40T. These are gearboxes only for top entering tank agitators - includes propeller blades 3-blade design and bottom steady assembly (no shaft). One sn is R0628210602. Ratio 30.65, Output rpm 38, Motor is 40 HP 1765 rpm. CW rotation - originally designed for fermenter tank mixer but not used. There are (2) available, priced separately

Place Holder
Item cp164 - Hammermill
Manufacturer
Jacobson
Model
P-24214DTF

Jacobson Hammermill. Model P-24214DTF, s/n 34101. This model is similar to model XLT 24313. Motor approx 40HP, 460/3/60. Material carbon steel, 24" diameter rotor, 14" width of mill, approximately 48 hammers, flip-up hinge. (See attached pdf - similar to XLT24313)

Place Holder
Item cp184 - Hammermill
Manufacturer
Champion
Model
11.5 x 22

Champion 11.5 x 22 Hammermill. Includes 40HP motor.

Place Holder
Item cp133 - Heat exchanger Plates
Manufacturer
Alfa Laval
Model

Alfa Laval Heat exchanger Plates - Wide gap for MA30-SFG heat exchanger, regasketed. Approximately 165, priced separately.

Place Holder
Item cp135 - Heat Exchanger, Plate
Manufacturer
Alfa Laval
Model
MA30-SFG

Alfa Laval Plate & Frame Heat Exchanger, Model MA30-SFG with wide gap plates. Surface area 791 sq. ft., approx. 50 plates. ASME rated at 150 psi at 250F Serial # 30105-57660.

Place Holder